Setting up Mac Remote Access |
Setting up TCP/IP
Click the apple menu -> control panels -> TCP/IP.
In the TCP/IP control panel, change "Connect Via" to "PPP", and choose to Configure "Using
a PPP Server" Also enter the Search Domain, and Name Server addresses as shown below. Close this window and
save if prompted.
Instructions for Remote Access (IMac and Newer Macs)
Click the apple menu -> control panels -> remote access. Under Remote Access, enter your
login name, password, and phone number you will be dialing.
Still under Remote Access, click Options -> Protocol. Under "Use Protocol" choos "PPP."
Also, make sure the boxes the first three check boxes are checked. Click "OK" and save if prompted.
Under Remote Access, click connect to dial into Netpath.
|